JetCat PRO Turbines
The JetCat PRO turbines offer maximum integration and installation. All system equipment required for turbine operation is fully integrated under the turbine hood. Apart from the supply battery, the fuel tank and the control signals, no further external subsystems are required!
JetCat P250PRO-S
The new P250-PRO-S is particularly suitable for large models in the 25 kg class, 3D sports jets and industrial applications. The completely new kerosene start system impresses with start times of under 20 seconds. Sensational thrust-to-weight ratio with a system weight of all components (turbine, Pro-Interface, mounting clamps) below 2300g. The installation effort is reduced to a minimum because the ECU, pump, valves and filter are completely integrated in the turbine. The connection to the RC system is made via our PRO interface, which provides additional interfaces such as: Telemetry (Jeti, Graupner Hott, Multiplex, Futaba), GSU connection, Airspeed sensor, CAN bus interface, RS232 interface, Twin -Engine cross-check and online software updates.
JetCat-PRO turbine functions
- Innovative kerosene starting system: no preheating, no glow plug wear out, minimal power consumption for the ignition system (only a few mA).
- The turbine ignites within 1.5 seconds after the start command and is ready to idle after typically 15 seconds (max. 20 seconds).
- Capable in Air Restart (manual or automatic)
- High power brushless starter
- Brushless fuel pump
- Fully automatic fuel suction function. The system automatically detects as soon as fuel is applied to the pump / has been sucked in. There is no need to manually fill the fuel lines.
- Barometric altitude / pressure sensor, for automatic turbine adjustment to operating altitude.
Set content
JetCat P250-PRO-S Set including:
|
1x
|
JetCat P250-PRO-S
|
71152-0270
|
|
1x
|
Turbine Mounting Clamp
|
41152-0248
|
|
1x
|
JetCat PRO-Interface
|
61168-0010
|
|
1x
|
JetNet
|
61128-0052
|
|
1x
|
Mini GSU Remote Controller
|
61161-0000
|
Technical Specifications
|
Pressure Ratio
|
3,8
|
|
Mass flow (kg/s)
|
0,47
|
|
Consumption Full load (ml/min)
|
820
|
|
Consumption Idle (ml/min)
|
138
|
|
Weight [g]
|
2155
|
|
Diamter (mm)
|
121
|
|
Length (incl. Starter) (mm)
|
322
|
|
Gewicht Set im Karton (g)
|
3290
|
|
Dimensions Carton (LxBxH; cm)
|
|
|
Exhaust Gas Temperature (°C)
|
480-750
|
|
Idle rpm (1/min)
|
35000
|
|
Max rpm (1/min)
|
117000
|
|
Thrust @ idle (N)
|
11,8
|
|
Thrust @ max Rpm (N)
|
250
|
|
Exhaust Gas Velocity (km/h)
|
1860
|
|
Exhaust Gas Power Output (kW)
|
75
|
|
SFC @ max Rpm (kg/Nh)
|
0,158
|
Basket discount
Value above 4,000.00 €
-
Discount:
1 %
Value above 7,000.00 €
-
Discount:
2 %
Value above 10,000.00 €
-
Discount:
3 %
