JetCat SPT15RX-H Complete Set

Price excl. VAT, plus delivery

4,915.12 €
5,849.00
Price incl. VAT, plus delivery
Price reductions

JetCat SPT Turbines

Propeller-driven models do not have to do without the advantages of turbine technology. The JetCat SPT turboprop engines have high power reserves in high-tech guise. The basic design and function of the engines are similar to those used in man-bearing aviation. The principle is easy to understand. It is only necessary to convert the high power of the engine into usable shaft power in a suitable way. However, this is not easily possible at the very high speeds. The necessary reduction takes place in 2 stages. Once in a gas ratio, then through a gear transmission. This means that the gas jet of the so-called core engine drives a turbine wheel in operation, which sits on a second shaft. This second shaft is mechanically absolutely independent of the rotor of the basic engine and receives its drive power only from the kinetic energy of the exhaust gas jet. The second shaft drives directly into a gear suitable for high speeds, which reduces the speed to suitable propeller speeds. Also completely new is the electronic control which processes and regulates both the speed of the primary and secondary shaft. The pilot can fully concentrate on flying, the complex engine management is fully electronic.

JetCat SPT-H

The JetCat SPT-H Variants (SPT15-RX-H, SPT10-RX-H, SPT5-H) are deployed in the helicopter area. An ECU software specially developed for this application allows the free programming of up to three main rotor speeds, which can then be switched on the transmitter side by means of a 3-step switch. The electronic control of both shafts ensures that the rotor speed is kept constant even during load changes.

Technical Specifications

Pressure Ratio

3,5

Mass flow (kg/s)

0,37

Consumption Full load (ml/min)

550

Consumption Idle (ml/min)

100

Weight [g]

4400

Diameter (mm)

112

Length (incl. Starter) (mm)

520

Gewicht Set im Karton (g)

 

Dimensions Carton (LxBxH; cm)

 

Exhaust Gas Temperature (°C)

480-730

Gear Ratio Tailrotor

 

Shaftpower (kW)

 

Shaftpower (HP)

 

Dimensions

520x170

Idle rpm (1/min)

33000

Max rpm (1/min)

125000

Gear ratio 2nd shaft

8,0

Idle rpm 2nd shaft (1/min)

Depending on helicopter mechanics

Propeller

 

Max rpm 2nd shaft (1/min)

7000

Max rpm main rotor shaft

8750

Torque, max (Ncm)

1228

 

Additional product information

Handbook Download

Selection: JetCat SPT15RX-H Complete Set

Product no. GearRatio Price
1146-0001 4,0 5,849.00 € *
1146-0002 10,24 5,849.00 € *
* Prices incl. VAT, plus delivery
Browse this category: Helicopter Turbines